🐙 Octoplus/Octopus Suite v.1.5.7 is out! 🐙

Octoplus/Octopus Suite v.1.5.7 Release Notes:

🐙 Added support for the following models:

• SM-G960F - added Read Codes (via server)
• SM-G960N - added Read Codes (via server)
• SM-G965F - added Read Codes (via server)
• SM-G965N - added Read Codes (via server)

• SM-A600F - added Read Codes (via server)
• SM-A600FN - added Read Codes (via server)
• SM-A600G - added Read Codes (via server)
• SM-A600GN - added Read Codes (via server)
• SM-A600N - added Read Codes (via server)

• SM-J400F - added Read Codes (via server)
• SM-J400G - added Read Codes (via server)
• SM-J400M - added Read Codes (via server)

• SM-J600F - added Read Codes (via server)
• SM-J600FN - added Read Codes (via server)
• SM-J600G - added Read Codes (via server)
• SM-J600GF - added Read Codes (via server)
• SM-J600GT - added Read Codes (via server)
• SM-J600L - added Read Codes (via server)
• SM-J600N - added Read Codes (via server)

🐙 Added new additional Read Codes (via server) method for the following Exynos CPU-based devices (all firmwares and KNOX are supported, no root required):

• SM-A320F, SM-A320FL, SM-A320Y
• SM-A520F, SM-A520K, SM-A520L, SM-A520S, SM-A520W
• SM-A530F, SM-A530N, SM-A530W
• SM-A720F
• SM-A730F, SM-A730N
• SM-G950F, SM-G950FD, SM-G950N, SM-G955F, SM-G955FD, SM-G955N
• SM-J530F, SM-J530FM, SM-J530G, SM-J530GM, SM-J530K, SM-J530L, SM-J530Y, SM-J530YM
• SM-J730F, SM-J730FM, SM-J730G, SM-J730GM, SM-J730K
• SM-N950F, SM-N950FD, SM-N950N

Note: Read Codes (via server) operation for all mentioned above devices works for most available device firmwares (modems). If your device has unsupported modem, just write another available firmware or proper supported modem. Or wait a few hours and try to repeat the operation again - support for unsupported modem firmware will be added to server automatically during a few hours.

🐙 Added new additional Read Codes method for SM-G950x and SM-G955x, based on Qualcomm CPUs. From now on, two Read Codes methods are supported - Read Codes (Via DIAG port) and Read Codes (Via ADB interface). If Read Codes operation was unsuccessful by using the first method, try to perform it using the second Read Codes method.

More info and discussion are HERE
_______________________________________________
WBR,
Octoplus Box Team

from GSM-Forum - Service Products News & Updates https://ift.tt/2KEH8lF