Telstra 4GX HD – MT6735P
ZTE Blade A475 – MT6735P
ZTE Blade L4 Pro – MT6735M
Please notice the different HW CHIP ID's
The Telstra 4GX HD is a rebranded ZTE Blade A475 with an MT6735 platform, The main difference between these devices is the inclusion of integrated graphics chips with the MT6753M Versions.
If you installed a custom rom built for the MT6753M onto the MT6735 or MT6753P then it'll most definitely cause Graphics errors, Lines on screen etc…
TWRP 3.0.2 – Ported for Telstra 4GX HD ( MT6735 )
Files Needed
SP Flash Tool version 5.16 or Above
Here : https://www.needrom.com/download/sp-flash-tool-v5-1612
MT6735_Android_Scatter.txt
Here : http://www.needrom.com/download/mtk-scatter-builder-helper/
TWRP 3.0.2.img
Log in for links
INSTALL INSTRUCTIONS
Get your Scatter file from using MTK Scatter Builder Link
Download, Install and Open SP Flash Tool
Download TWRP 3.0.2.img and place it in the same location as your Scatter file
Load your Scatter File in SP Flash Tool
Select the recovery line in SP Flash Tool and then double tap the area with the file location on recovery line, This allows you to select the image that you would like to install on the recovery partition, Navigate to the TWRP3.0.2.img and select it.
You may need to gather a Preloader from your device to be able to flash images. I will put my preloader in the links for the Telstra 4GX HD just in case. please look at my video on extracting a preloader with SP Flash Tool if you don't want to risk using my preloader. Video Link :
Now you should load your preloader in SP Flash Tool to allow flashing.
You should now have only a preloader and recovery img visible in SP Flash Tool, Unselect the Preloader ( IMPORTANT ) Flashing Preloader Causes Issues, We only need it loaded to allow flashing in SP Flash Tool ( Software Requirements ) so make sure their is only one img to be flashed, this would be the recovery with TWRP set in path.
You should have unselected all other images, so only the recovery will get replaced
Select Download Only as the Method of Flashing, Not Firmware Upgrade or Format All Etc…
Turn your Telstra 4GX HD off andand remove the battery
Place the battery back into the device but DO NOT turn it on yet
Place a USB cable into your PC, but not into the device yet
Now hit start in SP Flash Tool, i think its start or maybe flash now or something similar.
Now plug your other end of the USB Cable into the Telstra 4GX HD while it is switched off.
Flashing will have commenced and you'll see OK
After flashing says OK you should unplug your USB Cable and then Plug It Back In ( this allows SP Flash Tool to reinitialize your device )
After your device charging screen appears, you can safely remove the USB Cable and turn on the device
BOOT RECOVERY
Turn off you device
hold volume down and power button simultaneously until you see the black boot screen asking the method of booting
Press volume down until you reach Recovey and then press volume UP to select it.
RECOVERY will Boot
DISCLAIMER :
I TAKE NO RESPONSIBILITY FOR ANY DAMAGES AND/OR LEGAL ACTION THAT MAY RESULT FROM USING THIS GUIDE
YOU AGREE TO NOT HOLD THE PUBLISHER OF THIS POST AND IT'S ASSOCIATED FILES RESPONSIBLE OR LIABLE FOR ANY DAMAGES AND/OR LEGAL ACTION THAT MAY RESULT FROM USING THIS GUIDE.
from ROMs http://ift.tt/2oeQYBf
No comments:
Post a Comment